P-200 P-260 P-320 PET Preform Injection Molding System

Short Description:

Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface.

Product Detail

Product Tags

Features

Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface.

2.Optimized cycle utilization - being mounted on the moving platen , the cooling system remains active within 85% of the overall cycle-time.

3.Capacity of PET injection molding system is from 230 to 320 tonnes ( 2000KN to 3200KN ) , and it is available for the preform mould maximum with 96 cavities.

Specifications

MODEL		UNIT	P-200	P-260	P-320
Injection Unit	Screw Diameter	mm	70	75	80
	Screw L/D Ratio		25	25	25
	Shot Volume	cm3	1016	1378	1689
	Injection Weight PET	g	1087	1474	1807
	Injection Rate	g/s	482	496	605
	Injection Pressure	Mpa	105	127	130
	Screw Speed	rpm	110	120	120
Clamping Unit	Clamping Force	kn	2000	2600	3200
	Moving Plate Stroke	mm	490	550	585
	Max.Mould Height	mm	540	580	720
	Min.Mould Height	mm	200	200	300
	Tie Bars Space(W×H)	mm	530×530	580×580	660×760
	Ejector force	kn	80	126	180
	Ejector Stroke	mm	140	150	180
	Ejector Number	n	5	5	9
Others	Max.Pump Pressure	Mpa	16	16	16
	Pump Motor Power	kw	30	37	44
	Heating Power	kw	28	32	37
	(L×W×H)Size	M	6×1.5×1.6	6.8×1.6×1.8	7.7×1.8×2
	Machine Weigh	T	7	8.5	13